| Main Category : Porous Plastic Material |
|
Sub Category : 11] Micro porous Cartridge For Air Dryer - POLYPORTM |
 Visit Homepage for : 
Feedback Form
Trade Enquiry Form
Contact Details
Product Performance Certificates POLYPOR TM this product is manufactured by omni- directional inter connecting pores permeable structures. These techniques give a wide range of precisely controlled pore size and pore distribution. There is no detoriation from inside and outside , as it is made from Polypropylenes plastic material and resistant to almost all chemicals and solvents . While filtering air, it repels oil and water and only air is passed, as the cartridges is leakered with Silicon Resin - Non Stic surface so contaminates of filter cartridges are more easily are more easily evaluated by visual examination as initially it is pure white plastic material. Cartridges are also available with activated carbon block moulded or like activated certain granules or Silencer Gel or Activated Alumina to make the air oil and odour free. The entire volume of cartridge is used, consequently the filter has high storage capacity for the particle sizes. |
|
|
| Properties : Free
Flow with a very low pressure drop ranging from 5 to 10% according
to the number of cartridge installed. The working pressure is upto
200 P.S.I and the product is tested at 250 P.S.I. Easily cleanable
by householdsoaps, grease and oil and cntaminate chocks are removed
by dipping in Methyl Chloride solvent . It is resistant to shocks so there is no chance of damage while installing and transiting . Very lowest cost product comparatively then by any other sintered production and is available in three different Microns 5,25,50 .
Ten Major Advantages of Micro porous Cartridge For Air Dryer-- POLYPORTM 1. The entire volume of cartridge is used , consequently the filter has high storage capacity for the particle sizes. 2. The product is manufactured by omni-directional inter connecting pores permeable structures. These techniques give a wide range of precisely-controlled pore size and pore distribution. 3. There is no detoriation from inside and outside as it is made from Polypropylene plastic material and resistant to almost all Chemicals and Solvents. 4. Very lowest cost product comparatively then any other sintered production like Ceramics , Bronze and stainless steel and is available in three different Microns of 5 , 25 , 50. 5. Free flow with a very low pressure drops ranging from 5 to 10% according to the number of cartridge installed. The working pressure is upto 200 P.S.I and the product is tested at 250 P.S.I. 6. While filtering Air ,it repels oil and water and only air is passed as the cartridge is leakered with Silicon Resin.-Non stick surface 7. The contaminates of Filter cartridges are more easily evaluated by visual examination as initially it is pure white plastic material. 8. Easily cleanable by household soaps , grease and oil and contaminated chocks are removed by dipping in Methyl Chloride solvent. 9. It is resistant to shocks so there is no chance of damage while installing and transitting. 10. Cartridges are also available with activated carbon block to make the air odour free.. |
|
Typical
Application: |