TECHNICAL FEATURES - POLYFLEXTM
Membrane sleeve with precision perforated "I" slits expands to produce
fine bubbles then contracts immediately itself
when air supply is stopped. This feature dramatically reduces the chance
for back flow or solids to clog the diffuser.
|
Types |
Sizes |
Moc |
Size of Bubble
( MM ) |
Service TEMP. |
Air
Flow Rate |
|
Membrane |
Support |
|
Tube |
Ø 63 x
500 / 620 / 1000Ø 90 x
620 / 1000 |
PDM /
PolyurethaneEPDM /
Polyurethane |
PVC
PVC |
1.0 -
2.0 1.0 - 2.0 |
80 -
120 80 - 120 |
8
M3 / Hr / Feet18
M3 / Hr / Feet |
TECHNICAL FEATURES - POLYPORTM
(AVAILABLE IN FINE, MEDIUM & COARSE MATERIAL WITH BLACK, WHITE & BLUE
COLOURS)
|
Types |
Sizes |
Moc |
Size of Bubble
( MM ) |
Service TEMP. |
Air
Flow Rate |
|
Membrane |
Support |
|
Tube |
(a) Ø 60 x
(b) Ø 70 x
(c) Ø 90 x500 / 1000 |
Porous
Plastic (HDPE)
P.T.F.E. |
HDPE |
1.0 -
2.0 |
70
200 |
(a) 10 (b) 15
(c) 20
M3
/ Hr / Feet |
Typical Application:
- Bio-logical waste water treatment
- Used in streams & fish ponds
(Aquaculture)
- Activated sludge waste water
aeration
- Industrial waste water treatment
plant
- Municipal waste water treatment
plant
- Waste water ozone diffusion
- Oxygenation for sludge stabilization
- Recarbonation, Nutrification, Grit
tanks, Grease removal and Floc-Agglomeration
- Contact aeration system
- Sequencing batch reactor (SBR)
- Lagoons & Channels
ADVANTAGES :
- High Oxygen transfer efficiency
- Self cleaning operation
- Fine bubble formation
- Non - clog opeartion
- Intermittent operation without water
back flow
- Easy & quick to install
- No moving part - assures safety
- Material resistant to waste water
- Unbreakable, light weight & Heavy
duty membrane to withstand high pressure
- Low pressure loss across diffuser
- Economic opeartion due to low
investment & opeartion cost
- Through intermixing of water and
sludge components & uniform concentration of oxygen throughout the
tank
- Negligible emission, odour, aerosols
& noise
- Enormous power saving
- High resistance to fouling
|
Feedback
Form
